Home › Fence Staining and Sealing
Our fence staining and sealing services in Bentonville, AR protect your wood fence from weathering and fading. We clean, prep, and apply professional grade stains or sealers that enhance color and block moisture. Extend the life of your fence and keep it looking fresh for years longer.
Legendary Fence Company Bentonville provides professional fence staining throughout Bentonville, AR, Arkansas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 479-348-4629 or request your free quote.
Fence staining in Bentonville that is tailored to our climate
In Northwest Arkansas, a wood fence lives through quick temperature swings, long stretches of humidity, and intense summer sun. That combination can twist boards, bleach color, and invite mildew if the wood is left untreated. Fence staining and sealing is how we stop that cycle.
Legendary Fence Company Bentonville focuses on the specific conditions your fence faces in Bentonville, Cave Springs, Centerton, and nearby neighborhoods. We look at how much direct sun your yard gets, how close your fence is to irrigation heads, and where water tends to sit after a storm. Those details help us choose the right stain type, color, and sealer so you are not just getting a nicer color, you are getting protection that matches how your fence is actually used.
For many local homes, especially those with pressure treated pine, staining at the right time is just as important as staining at all. We test moisture content so we do not trap water under a new finish. If your fence is brand new, we help you plan the right window for its first stain. If it is older, we check for rot at the posts and bottom boards so you are not sealing in existing problems.
Our fence staining and sealing process, step by step
You will always know what we are doing and why. Here is how a typical fence staining and sealing project with Legendary Fence Company Bentonville works.
1. Inspection and preparation plan
We start with a walk through of your fence line, noting gray or silvered boards, cracked or cupped pickets, nail pops, and any spots with heavy sprinkler exposure. We also identify plants, stonework, and siding that need protection during the work.
2. Cleaning and wood recovery
Most fences in Bentonville need more than a quick rinse. We use a low pressure wash combined with a wood cleaner that lifts out soil, mildew, and old failing stain without shredding the grain. For gray weathered boards, we often apply a wood brightener afterward so the lumber comes back closer to its original tone. This step is critical, because a stain put over dirty or oxidized wood will not bond correctly and will fail early.
3. Repairs before stain
If we see loose pickets, cracked rails, or early-stage rot at the bottom of posts, we address those before staining. There is no benefit to sealing a board that should be replaced, so we will talk through what is worth saving and what is not.
4. Masking and protection
We cover nearby concrete, brick, windows, and landscaping so any overspray or drips do not create permanent spots. On tighter Bentonville subdivisions where fences sit very close to neighboring homes, we take extra care to protect both sides of the property line.
5. Professional stain application
Depending on the fence and product, we apply stain by low pressure sprayer, brush, or a combination. Sprayers allow even coverage in the nooks between pickets while back brushing works the stain into the grain and avoids lap marks. We maintain a consistent wet edge so the color does not appear blotchy when it dries.
6. Final sealing and walk through
Many modern stains include the sealer, but in some cases we add an additional clear topcoat for high exposure sections, such as fences along south facing property lines. When everything is dry to the touch, we do a walk through with you, confirm satisfaction, and provide care instructions for the first 48 hours.
Stain and sealer options that fit your fence and your style
There is no one stain that is right for every fence in Bentonville. We help you choose a product that fits both your goals and your existing wood.
Transparent stains let the natural grain dominate, which works well on newer cedar fences or decorative accent sections. These give a subtle tint and strong water resistance, but they need more frequent reapplication because there is less pigment blocking UV.
Semi transparent stains are the most popular for pressure treated pine privacy fences across Bentonville. They show the grain but carry more color and better sun protection. These are a good choice if your fence is a few years old and has started to gray, because the pigment helps even out variations in the wood.
Solid color stains look more like paint, but are engineered to soak into the wood and resist peeling better. We consider these for older fences with heavy discoloration or old stain that cannot be fully removed. They also work well when you want the fence to match trim or other structures.
For sealers, we use products that combine water repellency with UV inhibitors suited for the Arkansas sun. In shaded or heavily irrigated yards, we may recommend formulations with stronger mildewcides, since those fences stay damp longer and are more prone to algae and mildew growth.
What affects fence staining cost in Bentonville
Every fence and yard is different, so we are transparent about what actually drives price. Linear footage is only one piece.
Condition of the fence is often the biggest factor. A lightly weathered 3 year old fence on a level lot will cost less to prepare than a 12 year old fence with heavy graying, failing old stain, or sagging sections. Extra cleaning, sanding rough spots, and replacing damaged boards requires more time and material.
Height and accessibility matter too. A standard 6 foot privacy fence around a clear, fairly flat yard is faster and safer to work on than an 8 foot fence on a slope or a fence that borders thick brush or rocky drainage areas, which we see in several Bentonville subdivisions. Tight spaces between houses can also slow work, since we have to use more hand application and more extensive masking.
Product choice will influence cost. High quality oil based or modified oil stains generally last longer on local fences that get full sun and repeated wetting, but they cost more than basic water based products. Sometimes investing in a longer lasting stain means fewer full restains over the life of the fence, so we walk through the long term math with you.
We always provide a written estimate that breaks out preparation, repairs, and staining separately when it makes sense. That way you can see exactly where your budget is going and decide if you want to phase any work.
Common fence staining issues and how we prevent them
Because we work on fences across Bentonville and the surrounding area, we have seen the most common staining mistakes and know how to avoid them.
Uneven color and lap marks happen when stain is applied in direct, intense sun or in small disconnected sections. We plan our work to follow the shade when possible, keep a consistent wet edge, and adjust technique for fences with highly varied grain.
Peeling or premature failure often traces back to poor preparation or incompatible products layered on top of one another. Before we stain, we test for existing coatings. If we find film forming paint or low quality stain, we discuss whether stripping, sanding, or a switch to a more suitable product is necessary.
Mildew and algae growth is common on fences that run along shaded property lines or near irrigation. We treat organic growth thoroughly before staining, then choose products designed for higher moisture environments. We also talk with you about simple changes, like adjusting sprinkler heads so they do not soak the fence every morning.
Overspray on neighboring property can become a real concern in close Bentonville neighborhoods. We use shields, covers, and careful spray patterns, and in some cases we primarily brush and roll where property lines are especially tight. When needed, we coordinate with your neighbors so no one is surprised on staining day.
When to stain your fence and why local timing matters
Timing in Northwest Arkansas is critical for getting a long lasting result. New pressure treated pine fences need time to dry out before they can properly absorb stain. In our climate, that is often 3 to 6 months, but we verify by checking moisture content instead of guessing by age alone.
For existing fences, we recommend restaining when you notice color significantly fading, water soaking into the boards instead of beading, or hairline surface cracks beginning to appear. For many Bentonville homeowners, that window is 3 to 5 years depending on sun exposure and the products previously used.
Weather is a big factor. We schedule stain work for stretches with moderate temperatures and low rain chances. High humidity, sudden cold snaps, or surprise thunderstorms can affect how stain penetrates and cures. Because we work locally, we stay flexible with scheduling and watch the same forecasts you do, adjusting plans so your project is not rushed into bad conditions.
Legendary Fence Company Bentonville is here to help you plan, not just react. During your estimate, we will give you a realistic timeline for preparation, application, and drying, tailored to the season and your specific yard. You will know what to expect, how to prepare, and how to care for your freshly stained and sealed fence for the best long term protection.
